This standard is issued under the fixed designation d 1193; Standard specification for reagent water 1.1 this specification describes the required characteristics of waters deemed suitable for use with the standards under the. This standard has been approved for use by agencies of the department of defense. Scope 1.1 this specification covers the required characteristics of waters deemed suitable for use with the standards under the jurisdiction of astm international. E1note—an editorial change was made in 1.1 in october 2001. 1.2.1 type i grade of reagent water shall be prepared by the distillation of feed water having a maximum conductivity of 20 iuuhos/cm at 298 k (25°c) followed by polishing with Asuperscript epsilon (e) indicates an editorial change since the last revision or reapproval.this standard has. The number immediately following the designation indicates the year of original adoption or, in the case of.
This Standard Is Issued Under The Fixed Designation D 1193;
Asuperscript epsilon (e) indicates an editorial change since the last revision or reapproval.this standard has. This standard has been approved for use by agencies of the department of defense. A number in parentheses indicates the year of last reapproval.
1.2.1 Type I Grade Of Reagent Water Shall Be Prepared By The Distillation Of Feed Water Having A Maximum Conductivity Of 20 Iuuhos/Cm At 298 K (25°C) Followed By Polishing With
Standard specification for reagent water 1.1 this specification describes the required characteristics of waters deemed suitable for use with the standards under the. E1note—an editorial change was made in 1.1 in october 2001. The number immediately following the designation indicates the year of original adoption or, in the case of.
Scope 1.1 This Specification Covers The Required Characteristics Of Waters Deemed Suitable For Use With The Standards Under The Jurisdiction Of Astm International.
Images References
The Number Immediately Following The Designation Indicates The Year Of Original Adoption Or, In The Case Of.
Asuperscript epsilon (e) indicates an editorial change since the last revision or reapproval.this standard has. Standard specification for reagent water 1.1 this specification describes the required characteristics of waters deemed suitable for use with the standards under the. 1.2.1 type i grade of reagent water shall be prepared by the distillation of feed water having a maximum conductivity of 20 iuuhos/cm at 298 k (25°c) followed by polishing with
E1Note—An Editorial Change Was Made In 1.1 In October 2001.
This standard is issued under the fixed designation d 1193; Scope 1.1 this specification covers the required characteristics of waters deemed suitable for use with the standards under the jurisdiction of astm international. A number in parentheses indicates the year of last reapproval.
